Pivotal-powersports Remote Control Manuel d'utilisateur télécharger pdf

Remote Control Installation Instructions

Find a clean and dry location to mount the control unit. This remote control system is not

waterproof, so assure that the control unit and the remote handset transmitter does not

get wet. Attach the unit to the surface using double sided tape or plastic zip ties.

The blue color wire is the ANTENNA wire; it should not be connected to any other wire

and also be positioned as high as possible to increase the remote control range.

The black color wires are the GROUND wires; they should be connected to the power

source ground and the device’s ground that is being controlled.

The red wire is the POWER IN; it should be connected to the 12 volt power source.

The white wire is the POWER OUT; it should be connected to the 12 volt product that is

being controlled.

Press the ON or OFF buttons on the handset transmitted to activate or deactivate the

product you are controlling.

When the battery on the handset transmitter gets low, the operating range will decrease

as well. Replace the battery to remedy.

Page 1

Remote Control Installation Instructions Find a clean and dry location to mount the control unit. This remote control system is not waterproof, s

Pas de commentaire

Pivotal-powersports Remote Control Manuel d'utilisateur